https://pon.proz.com/forum/memoq_support/372478-undo_copy_all_source_to_target.html
This site uses cookies. Some of these cookies are essential to the operation of the site, while others help to improve your experience by providing insights into how the site is being used. For more information, please see the ProZ.com privacy policy.
Cookie settings

Fóruns técnicos » MemoQ support »
Undo copy all source to target?
Autor da sequência: Samuel Murray
Samuel Murray
Samuel Murray  Identity Verified
Holanda
Local time: 03:47
Membro (2006)
Inglês para Africânder
+ ...
Apr 27

Hello everyone

I've heard about this bug but it had never happened to me before. I must have pressed some kind of shortcut, and MemoQ had replaced all translations with the source text and then confirmed all segments. I'm on 11.4. Is there any hope of recovery? This is an online checked-out project, so I can't just recreate the project. Attempting to re-pre-translate the project yields no results (likely because MemoQ synchronizes with the server and replaces the TU as soon as ... See more
Hello everyone

I've heard about this bug but it had never happened to me before. I must have pressed some kind of shortcut, and MemoQ had replaced all translations with the source text and then confirmed all segments. I'm on 11.4. Is there any hope of recovery? This is an online checked-out project, so I can't just recreate the project. Attempting to re-pre-translate the project yields no results (likely because MemoQ synchronizes with the server and replaces the TU as soon as you confirm a segment). I usually export to RTF before starting the translation, but I was in a hurry and did not do it this time, so there's no local backup of the pre-translated segments.

Samuel ▲ Collapse
 
Stepan Konev
Stepan Konev  Identity Verified
Federação Russa
Local time: 04:47
Inglês para Russo
Undo? Apr 27

Too obvious to ask that but did you try Ctrl+Z? When this happens with Trados, the undo command is the easiest method to recover.
 
Samuel Murray
Samuel Murray  Identity Verified
Holanda
Local time: 03:47
Membro (2006)
Inglês para Africânder
+ ...
Autor do assunto
Alas Apr 27

Alas, Ctrl+Z has no effect in MemoQ. It works wonderfully in Trados.
 
Christopher Schmidt
Christopher Schmidt  Identity Verified
Estados Unidos da América
Local time: 21:47
Alemão para Inglês
+ ...
Remote server? Apr 28

I've done this before as well. I'm pretty sure the combo of Ctrl Shift A (select all) followed by Ctrl Shift S (copy source to target) did it. I was lucky to have been working remotely on my client's server when it happened (using a stand-alone version of MemoQ). The client was able to restore to the last in-tact version of the translation. If you're working on a remote server, maybe that's an option for you?
 
Dr. Matthias Schauen
Dr. Matthias Schauen  Identity Verified
Alemanha
Local time: 03:47
Membro (2007)
Inglês para Alemão
Ctrl + Z ... Apr 28

... worked for me in an identical case. (memoQ 9.14)
 
Samuel Murray
Samuel Murray  Identity Verified
Holanda
Local time: 03:47
Membro (2006)
Inglês para Africânder
+ ...
Autor do assunto
@Matthias Apr 28

Dr. Matthias Schauen wrote:
Ctrl + Z worked for me in an identical case. (memoQ 9.14)

Ctrl+Z was the first thing I tried, within 1-2 seconds after I realized what had happened. For some reason, Ctrl+Z didn't do anything this time.
 
Samuel Murray
Samuel Murray  Identity Verified
Holanda
Local time: 03:47
Membro (2006)
Inglês para Africânder
+ ...
Autor do assunto
@Christopher Apr 28

Christopher Schmidt wrote:
The client was able to restore to the last in-tact version of the translation. If you're working on a remote server, maybe that's an option for you?

This client would have been able and willing to do this for me, but: it was the weekend and it was a relatively small job (200 words), although there were quite a few 100% and high fuzzy matches (which I had edited), so unfortunately I was not able to ensure absolute consistency with the client's previous TM.

I have just learnt of the shortcut Ctrl+Shift+Enter, which also confirms the segments, but does not synchronize with the server. This would be a useful shortcut since you need to confirm the segments in order to do QA, but there is really no reason to synchronize until the very end.

This is, in fact, a bugbear that I have with MemoQ when doing QA: every time I mark a QA item as false positive, MemoQ resynchronizes with the server, which means that if you have a slow connection or a slow server, marking false positives in the QA process can be a painfully slow process (you have to wait 1-2 seconds each time before moving on to the next flag). Unplugging the network cable doesn't help: then MemoQ simply tries and tries and tries to connect.

Christopher Schmidt
 


To report site rules violations or get help, contact a site moderator:

Moderador(es) deste fórum
Maya Gorgoshidze[Call to this topic]
Peter Zauner[Call to this topic]
Prachya Mruetusatorn[Call to this topic]

You can also contact site staff by submitting a support request »

Undo copy all source to target?


Forum rules
Help and orientation




CafeTran Espresso
You've never met a CAT tool this clever!

Translate faster & easier, using a sophisticated CAT tool built by a translator / developer. Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools. Download and start using CafeTran Espresso -- for free

Buy now! »
Protemos translation business management system
Create your account in minutes, and start working! 3-month trial for agencies, and free for freelancers!

The system lets you keep client/vendor database, with contacts and rates, manage projects and assign jobs to vendors, issue invoices, track payments, store and manage project files, generate business reports on turnover profit per client/manager etc.

More info »