Chinese to English: Qma9000系列电流矢量控制变频器 General field: Tech/Engineering Detailed field: Biology (-tech,-chem,micro-) | |
Source text - Chinese Qma9000系列是一款高性能电流矢量控制变频器,它采用磁通矢量技术和先进的现代控制理论,为电机在低速运转时提供更大的转矩,实现高性能的动态控制。有四种控制方式可供选择,在不采用PG的矢量控制时,它也可以从1%的低速开始,实现高启动转矩和无故障运行。采用PG控制时,则可以轻松实现零速高转矩运行。它是您改善品质和提高生产效率的理想选择。
特点
完美的电流矢量控制
通过同时控制电机的一次电流及其相位,分别独立控制磁场电流和力矩电流,实现了在极低速时的平滑运行和高力矩高精度的速度
丰富的控制功能
PID控制,滑差补偿功能,速度搜索功能和过/低转矩检测功能、节能运行控制功能
超群的转矩特性
即使在无PG的条件下,也能够实现150%/0.5Hz的高转矩特性
强有力的制动功能
15kw以下内置制动单元,15kw以上可选择外接制动电阻,便能实现强有力的制动功能。
高效节能控制
节能控制效果已接近理论最大节能效果* 超乎想像的节能运行功能
低噪音运行
高载频SPWM调制方式,大幅度地抑制噪音,特别适合于有噪音限制的场合
完善的电源高次谐波抑制对策
55kw以上全系列内置改善功率因数用直流电抗器,55KW以下的机种都预留了直流电抗器接线端子,可选直流电抗器以降低电源的高次谐波干扰
| Translation - English Qma9000 Series is a kind of high performance current vector control frequency converter. Magnetic flux vector technology and advanced modern control theory are used to provide higher torque in operation with low speed and obtain dynamic control with high performance. Four control modes may be selected. When PG vector control is not used, it can obtain high torque and failure-free operation from a 1% low speed. While PG control is used, it can easily obtain high torque in zero speed, which is the ideal choice to improve your quality and production efficiency.
Features
Perfect current vector control
By means of simultaneously controlling the primary current and its phase, the magnetic field current and torque Torquecurrent may be controlled individually to obtain a smooth run and a speed with high torque and high accuracy in a very low speed.
Plenty control functions
PID control, slip compensation,speed search, over/lower torque detection and energy efficiency control.
Excellent torque characteristics
even if without PG, 150%/0.5Hz high torque characteristic may be fulfilled.
Powerful braking function
The powerful braking function may be fulfilled with built-in braking units below 15kw and the units above 15kw equipped with external braking resistors.
Efficiency control
The efficiency control reaches the maximum effect in theory. *Power efficiency beyond imagination.
Low noise operation
High carrier frequency SPWM modulator may largely suppress the noise,which is especially suitable for the place with limitation for noise.
Perfect power ultra harmonics suppression countermeasures
For complete series of 55kw and above, built-in DC reactors for the purpose of improving power factors are equipped. For the units below 55KW, DC reactor wiring terminals are reserved, DC reactors are optional to reduce the interference of the ultra harmonics.
|
English to Chinese: 200-Series MicroTech Control Panel General field: Tech/Engineering | |
Source text - English General Description
The MicroTech control panel contains a model 280 microprocessor based controller which provides all
monitoring and control functions required for the safe, efficient operation of the chiller. The operator
can monitor all operating conditions by using the panel’s built in 4-line by 40-character keypad /
display or by using an IBM compatible computer running McQuay Monitor software. In addition to
providing all normal operating controls, the MicroTech controller monitors all safety devices on the
unit and will take corrective action if the chiller is operating outside of it’s normal design conditions.
If a fault condition develops, the controller will shut the system down and activate an alarm output.
Important operating conditions at the time an alarm condition occurs are retained in the controller’s
memory to aid in troubleshooting and fault analysis.
The system is protected by a password scheme which only allows access by authorized personnel. A
password must be entered into the panel keypad by the operator before any setpoints may be altered. | Translation - Chinese 概述
MicroTech控制面板包含280型微处理器式控制器,提供冷水机安全有效运行所需的所有监测和控制功能。通过使用面板内置的四排四十字符键盘/显示器或使用运行McQuay Monitor软件的IBM可兼容计算机,运行人员可以监视所有运行工况。MicroTech控制器不仅提供所有正常的运行控制,而且还监测机组的所有安全装置;并在冷水机运行超出其正常设计条件时采取纠正行动。如果产生了错误状况,控制器将关闭系统并输出报警信号。对于出现报警状况时的关键运行条件,将会保存在控制器的存储器内,从而协助进行故障排除和错误分析。
通过密码配置来保护系统,只有授权人员方可进入系统。必须由运行人员将密码输入面板键盘后,才能更改设定点。
|